MICROTEST 6367 LCR Meter offers a frequency range of 10Hz to 1MHz. It can measure parameters such as |Z| (impedance), |Y| (admittance), θ (phase angle), X (reactance), R (series/parallel resistance), G (conductance), B (susceptance), L (inductance), D (dissipation factor), Q (quality factor), DCR (DC resistance), and C (capacitance). It supports communication interfaces such as RS-232, Handler, LAN, USB Host, and can store test results and data via USB. With the optional PC connection software, it also enables sweep analysis capabilities. MICROTEST 6367 is an excellent choice for basic impedance measurements of electronic components.
Specification | Details |
Models | 6363 / 6364 / 6365 / 6366 / 6367 |
Frequency Range | 6363: 10 Hz–20 kHz; 6364: 10 Hz–100 kHz; 6365: 10 Hz–200 kHz; 6366: 10 Hz–500 kHz; 6367: 10 Hz–1 MHz |
Frequency Resolution | 5 digits |
Frequency Output Accuracy | ±0.01% |
Basic Measurement Accuracy | ±0.05% |
AC Test Signal | 10 mV–2 Vrms |
AC Voltage Resolution | 1 mV |
DC Test Signal | 10 mV–2 V |
DC Voltage Resolution | 1 mV |
Output Impedance | 100 Ω |
Measurement Modes | Meter Mode / Multi-Step List Mode |
Test Parameters | |Z|, |Y|, θ, X, R, G, B, L, D, Q, DCR and C |
|Z| / R / X Range | 0.001 mΩ–99.999 MΩ |
|Y| / G / B Range | 0.1 nS–99.999 S |
Capacitance Cs / Cp | 0.01 pF–9.9999 F |
Inductance Ls / Lp | 0.1 nH–99.999 kH |
Dissipation Factor D | 0.00001–9.9999 |
Quality Factor Q | 0.1–9999.9 |
DCR Range | 0.001 mΩ–99.999 MΩ |
Phase Angle θ | −180° to +180° |
Measurement Speed | Up to 8 ms |
Measurement Circuit | Series / Parallel |
Test Range | Automatic / Lock |
Correction | Open Circuit / Short Circuit |
Indicator | PASS / FAIL |
BIN Classification | Supported |
List Mode | Up to 8 sets |
Built-in Storage | 128 sets |
USB Host Storage | Test screen and data |
Trigger Modes | Auto / Manual / RS-232 / Handler / GPIB |
Interfaces | USB Host / RS-232 / Handler / LAN; GPIB optional |
Display | 7-inch TFT color LCD, 800 × 480 |
Power Supply | 98–132 VAC or 195–264 VAC, 47–63 Hz |
Power Consumption | 65 VA |
Operating Environment | 10–40°C; 20–90% RH |
Dimensions | 358 × 148 × 343 mm (W × H × D) |
Weight | Approx. 3 kg |
Applications | Resistors, capacitors, inductors, oscillators, sensors, delay lines, filters and resonators |
MICROTEST 6367 LCR Meter offers a frequency range of 10Hz to 1MHz. It can measure parameters such as |Z| (impedance), |Y| (admittance), θ (phase angle), X (reactance), R (series/parallel resistance), G (conductance), B (susceptance), L (inductance), D (dissipation factor), Q (quality factor), DCR (DC resistance), and C (capacitance). It supports communication interfaces such as RS-232, Handler, LAN, USB Host, and can store test results and data via USB. With the optional PC connection software, it also enables sweep analysis capabilities. MICROTEST 6367 is an excellent choice for basic impedance measurements of electronic components.
Specification | Details |
Models | 6363 / 6364 / 6365 / 6366 / 6367 |
Frequency Range | 6363: 10 Hz–20 kHz; 6364: 10 Hz–100 kHz; 6365: 10 Hz–200 kHz; 6366: 10 Hz–500 kHz; 6367: 10 Hz–1 MHz |
Frequency Resolution | 5 digits |
Frequency Output Accuracy | ±0.01% |
Basic Measurement Accuracy | ±0.05% |
AC Test Signal | 10 mV–2 Vrms |
AC Voltage Resolution | 1 mV |
DC Test Signal | 10 mV–2 V |
DC Voltage Resolution | 1 mV |
Output Impedance | 100 Ω |
Measurement Modes | Meter Mode / Multi-Step List Mode |
Test Parameters | |Z|, |Y|, θ, X, R, G, B, L, D, Q, DCR and C |
|Z| / R / X Range | 0.001 mΩ–99.999 MΩ |
|Y| / G / B Range | 0.1 nS–99.999 S |
Capacitance Cs / Cp | 0.01 pF–9.9999 F |
Inductance Ls / Lp | 0.1 nH–99.999 kH |
Dissipation Factor D | 0.00001–9.9999 |
Quality Factor Q | 0.1–9999.9 |
DCR Range | 0.001 mΩ–99.999 MΩ |
Phase Angle θ | −180° to +180° |
Measurement Speed | Up to 8 ms |
Measurement Circuit | Series / Parallel |
Test Range | Automatic / Lock |
Correction | Open Circuit / Short Circuit |
Indicator | PASS / FAIL |
BIN Classification | Supported |
List Mode | Up to 8 sets |
Built-in Storage | 128 sets |
USB Host Storage | Test screen and data |
Trigger Modes | Auto / Manual / RS-232 / Handler / GPIB |
Interfaces | USB Host / RS-232 / Handler / LAN; GPIB optional |
Display | 7-inch TFT color LCD, 800 × 480 |
Power Supply | 98–132 VAC or 195–264 VAC, 47–63 Hz |
Power Consumption | 65 VA |
Operating Environment | 10–40°C; 20–90% RH |
Dimensions | 358 × 148 × 343 mm (W × H × D) |
Weight | Approx. 3 kg |
Applications | Resistors, capacitors, inductors, oscillators, sensors, delay lines, filters and resonators |
{"one"=>"حدد 2 أو 3 عناصر للمقارنة", "other"=>"تم اختيار {{ count }} من 3 عناصر"}
